sterilizing channel sterilization device portable cabin transparent
cabine human disinfection system
In January 2020, the coronavirus epidemic hit. The technology
development team, which was urgently established by Shenzhen
University of technology and Shenzhen Singfun Technology Co., Ltd.,
gave up the Spring Festival holiday. After several days of efforts,
on the basis of the original relevant patent products, a new safety
clean disinfection channel, model X20, was developed.
This product provides a relatively closed space passage channel,
the whole channel is anti-bacterial and anti pollution, modular
assembly, using the thermal infrared thermometer system, before
entering the passage, the temperature of the personnel is detected,
after the temperature is normal, the personnel enter the activity
area through the disinfection channel, using the principle of
high-frequency ultrasonic vibration, At the frequency of 200000
Hertz (Hz) per minute, the water particles are hit into water mist,
the size of which is 10 microns. The disinfectant is filled in the
clean disinfection channel with the water mist. All personnel and
articles passing through the channel will adhere to the
disinfection water mist in all directions, so as to thoroughly
disinfect the personnel and articles in all directions and cut off
the transmission path of the virus.
A. Simple installation:Modular design, simple installation, installation can be completed
within 30 minutes.
B. Portability: the bottom is equipped with wheel, which is convenient to move.
The position can be adjusted flexibly according to the site.
C Accuracy: non-contact body temperature measurement, temperature measurement
error 0.3 ℃.
D. High efficiency: passing personnel can pass in 1-2 seconds without special stay,
and 2-3 people can pass at the same time.
This product has a wide range of applications, good mobile
performance, simple installation and strong applicability. It is
widely used in government agencies, enterprises and institutions,
schools, office buildings, offices, hotels, cinemas, catering
retail and other places where people flow in and out intensively.
It can measure temperature quickly, disinfect comprehensively,
standardize operation, reduce human investment, effectively avoid
cross infection, cut off the path of virus infection, and protect
people in and out Safety of personnel.
Covering an area of 1.9 M2
Appearance dimension: 1.40M long x 1.40M wide x 2.2m high.
The steel frame is made of 500MPa grade IV steel, and the three
sides are made of 10 mm toughened glass, with a gross weight of
300kg. At the bottom of the machine with wheel, which is easy to
move and fixed.
Keywords ultrasonic atomization;
water mist particle size 10 μ m;
capacity 13 L;
no water protection, current overload protection.
Dynamic display of face tracking temperature Dual spectrum and dual
channel all-weather real-time detection
Temperature measurement accuracy is plus or minus 0.3 ℃
Intelligent over temperature alarm and positioning, audible and
|4||Power||AC 220V 50HZ ；MAX Power 200W|
|6||Working environment||Indoor,temperature range: 0 ℃ - 40 ℃;|
Usage and dosage of disinfectant
- After the equipment is powered on, the power indicator lights of
the thermometer and atomizer are on.
- Turn on the atomizer switch and adjust the water mist quantity.
After 30 seconds of water mist spraying, the cabin is full of water
- The thermometer will start automatically after being powered on. If
you need to turn it off, please turn off the thermometer switch.
- The personnel pass in turn, without additional stay, and walk out
of the cabin slowly.
- The maximum consumption of disinfectant is 800ml / hour.